基于自然区块的城市热环境空间分异性研究     

杨智威  陈颖彪  吴志峰  千庆兰  黄清瑶 《地理科学进展》2019,38(12):1944-1956

通过有效解决建设用地子类划分,实现定量评价城市热环境的空间分异性,对改善城市生态环境、实现城市化的健康发展具有重要的意义和科学价值。论文以广州市为例,参考自然城市的概念,基于5类兴趣点(Point Of Interest,POI)开放数据,结合城市建设用地分类标准,构建5类自然区块;在Landsat 8遥感影像地表温度反演的基础上,计算分析自然区块下地表热场等级分布格局、热场平均值及热环境足迹范围,以对城市热环境空间分异性进行评价。研究表明：① 自然区块的构建,能准确地反映各类POI数据空间分布情况,能够实现对建设用地子类型的划分;② 5类自然区块内部地表热场等级均以高温像元为主,但等级分布具有显著差异。同时,自然区块的热场平均值由高到低的排序为：工业区块>商业服务业区块>交通与道路区块>居住区块>公共管理与服务区块;③ 自然区块形成的高温集聚区,存在热量扩散现象,实际影响范围大于其物理边界,5类自然区块的热环境足迹范围具有分异性。热环境足迹影响范围由大到小排序为：工业区块>商业服务业区块>居住区块>道路与交通区块>公共管理与服务区块。研究结果可为微观尺度上分析城市热环境、改善城市生态环境、实现城市化的健康发展提供科学依据。  相似文献   

Revisiting the morphological method in two-dimensions to quantify bed-material transport in braided rivers     

Gilles Antoniazza  Maarten Bakker  Stuart N. Lane 《地球表面变化过程与地形》2019,44(11):2251-2267

Research in the 1990s showed that bed-material transport rates could be estimated at the reach scale in both one-dimension and, over small spatial scales (10s of m), in two-dimensions. The limit on the latter was the spatial scale over which it was possible to obtain distributed data on morphological change. Here, we revisit the morphological method given progress in both topographical data acquisition and hydraulic modelling. The bed-material transport needed to conserve mass is calculated in both one and two dimensions for a 1600 m × 300 m Alpine braided river “laboratory”. High-resolution topographical data were acquired by laser scanning to quantify Digital Elevation Models (DEMs), and morphological changes caused by the flushing of the water intake were derived from repeated surveys. Based on DEMs of differences, 1D bed-material transport rates were calculated using the morphological method. Then, a 2D hydraulic model was combined with a topographic correction to route sediment through the network of braided channels and to obtain a spatially variable estimate of transport in both downstream and cross-stream directions. Monte Carlo simulation was applied to the routing model parameters, allowing identification of the most probable parameter values needed to minimize negative transport. The results show that within-section spatial compensation of erosion and deposition using the 1D treatment leads to substantial local errors in transport rate estimates, to a degree related to braiding intensity. Even though the 2D application showed that a large proportion of the total transport was actually concentrated into one main channel during the studied low flow event, the proportion of transport in secondary anabranches is substantial when the river starts braiding. Investigations of the effects of DEM resolution, competent flow duration and survey frequency related to ‘travelling bedload’ and sequential erosion-deposition emphasized the critical importance of careful data collection in the application of the morphological method. © 2019 John Wiley & Sons, Ltd.  相似文献   

Strain analysis of a seismically imaged mass‐transport complex,offshore Uruguay     

Michael J. Steventon  Christopher A.‐L. Jackson  David M. Hodgson  Howard D. Johnson 《Basin Research》2019,31(3):600-620

Strain style, magnitude and distribution within mass‐transport complexes (MTCs) are important for understanding the process evolution of submarine mass flows and for estimating their runout distances. Structural restoration and quantification of strain in gravitationally driven passive margins have been shown to approximately balance between updip extensional and downdip contractional domains; such an exercise has not yet been attempted for MTCs. We here interpret and structurally restore a shallowly buried (c. 1,500 mbsf) and well‐imaged MTC, offshore Uruguay using a high‐resolution (12.5 m vertical and 15 × 12.5 m horizontal resolution) three‐dimensional seismic‐reflection survey. This allows us to characterise and quantify vertical and lateral strain distribution within the deposit. Detailed seismic mapping and attribute analysis shows that the MTC is characterised by a complicated array of kinematic indicators, which vary spatially in style and concentration. Seismic‐attribute extractions reveal several previously undocumented fabrics preserved in the MTC, including internal shearing in the form of sub‐orthogonal shear zones, and fold‐thrust systems within the basal shear zone beneath rafted‐blocks. These features suggest multiple transport directions and phases of flow during emplacement. The MTC is characterised by a broadly tripartite strain distribution, with extensional (e.g. normal faults), translational and contractional (e.g. folds and thrusts) domains, along with a radial frontally emergent zone. We also show how strain is preferentially concentrated around intra‐MTC rafted‐blocks due to their kinematic interactions with the underlying basal shear zone. Overall, and even when volume loss within the frontally emergent zone is included, a strain difference between extension (1.6–1.9 km) and contraction (6.7–7.3 km) is calculated. We attribute this to a combination of distributed, sub‐seismic, ‘cryptic’ strain, likely related to de‐watering, grain‐scale deformation and related changes in bulk sediment volume. This work has implications for assessing MTCs strain distribution and provides a practical approach for evaluating structural interpretations within such deposits.  相似文献   

Two Quasi-periodic Oscillations in ESO 113-G010     

《Chinese Astronomy and Astrophysics》2020,44(1):32-40

  相似文献   

基于垂直剖面函数的天顶对流层延迟插值算法     

徐康  邓兴升 《大地测量与地球动力学》2020,40(1):66-70

通过分析由ERA-Interim气象再分析资料积分方法得到的天顶对流层总延迟随高程变化的规律,提出一种基于垂直剖面函数的天顶对流层延迟(ZTD)插值算法。该算法以ZTD的垂直分布规律为基础,通过垂直剖面函数实现ZTD在高程方向上的精准投影延拓,可以避免因高差较大造成的空间内插结构畸形。采用IGS站提供的高精度对流层产品进行实验验证表明,该算法相对于传统算法能够有效提高ZTD改正值的精度,尤其在高差超过1 km的情况下,相对于反距离加权法精度提升了96%,相对于空间回归法精度提升了79%。  相似文献   

赣南狮吼山硫铁多金属矿区花岗岩地球化学、年代学特征及其成因     

贺根文  路思明  彭琳琳  于长琦  李伟  刘翠辉 《吉林大学学报(地球科学版)》2020,50(5):1491-1504

狮吼山矿区是江西省内规模最大的矽卡岩型硫铁多金属矿床，伴生W、Cu、Au多种成矿元素，成矿作用与矿区出露的茶山迳复式花岗岩体有关。岩体主要包括茶山迳似斑状黑云母二长花岗岩和莲湖细粒二长花岗岩两期，为研究成矿岩体的侵位时代、岩石成因及与成矿的关系，本次工作进行了U-Pb锆石定年、岩相学和岩石地球化学等测试分析。结果表明：岩体具有高硅、高钾、富铝的特征，属高钾钙碱性系列花岗岩；轻重稀土元素分馏明显，均为右倾型，弱Eu负异常，以富集Cs、Rb、Th、U、Pb，亏损Ba、Nb、Sr、和Ti等元素为主要特征，属于低Ba-Sr壳源花岗岩类；锆石具较好晶形，具典型岩浆锆石特征，利用LA-ICP-MS进行U-Pb测年，获得谐和年龄为（162.4±0.6）Ma（MSWD=1.8），加权平均年龄为（162.4±1.4）Ma（MSWD=1.4），谐和年龄与加权平均年龄在误差范围内高度一致，表明茶山迳复式岩体侵位于燕山早期中侏罗世；综合考虑岩体矿物组合、主微量元素及高分异特征，认为其成因分类应属于S型花岗岩；对比中国花岗岩成矿元素平均含量，茶山迳两期花岗岩均具有较高的W、Mo、Bi、Pb等成矿元素含量，可同时为成矿作用提供热源、流体及物质。  相似文献   

广西宜州裂陷槽晚古生代演化与早石炭世沉积锰矿分布^*          下载免费PDF全文

黄恒  颜佳新  余文超 《古地理学报》2020,22(5):1001-1011

滇黔桂地区晚古生代浅水碳酸盐岩台地与深水硅泥质盆地共存的古地理格局,是在加里东期褶皱基底上发生裂陷及差异沉降而发展起来的。广西宜州—柳州一带既是晚古生代上扬子碳酸盐岩地台南缘1条重要的沉积相分界线,也是晚古生代桂中和桂北地层分区、古生代—中生代雪峰山南段构造体系和桂中坳陷构造体系的分界线。文中通过对宜山—柳州一带晚古生代地层的区域对比和成因分析,恢复了桂中宜山—柳州地区晚古生代沉积盆地的演化历史。狭长型宜州裂陷槽盆地西起丹池断裂,向东经龙头、北牙、宜州延伸至柳州。自中泥盆世开始,首先在东西两端开始裂陷下沉,至早石炭世发展成型。受北侧来自江南隆起带陆源碎屑物质充填影响,其表现为南北不对称并在早石炭世晚期被填平。在宜州裂陷槽内发育多处早石炭世沉积型碳酸锰矿,含矿地层分布、地层序列及其沉积背景明显与裂陷槽演化有关。它们既是盆地演化历史的见证,也体现了桂中地区裂陷海槽的特色,值得在后续锰矿成因研究中予以重视。  相似文献   

ASO-S卫星工程科学应用系统的数据库设计          下载免费PDF全文

葛蕴翊  黎辉  黄宇  李敬伟  雷仕俊  藏京京  苏杨  封莉  李友平  李瑛  徐遵磊  李翔 《天文学报》2020,61(4):46

先进天基太阳天文台(Advanced Space-based Solar Observatory, ASO-S)卫星是我国首颗太阳观测卫星, 主要观测太阳耀斑和日冕物质抛射以及产生它们的磁场结构. ASO-S卫星的科学应用系统是科学卫星工程的6大系统之一, 它连接科学用户和卫星数据, 为将卫星的科学数据转化为科学成果提供保障. 科学应用系统的数据库是连接软件与海量数据的枢纽, 为科学数据生产和用户服务及运行提供数据层的支撑. 介绍了科学应用系统的数据库架构设计、数据库的选择以及数据库性能优化和表样例. 这里的数据库包括观测计划、工程参数、运维日志、科学数据、定标数据和特征事件识别等数据库. 这些数据库的建设将为ASO-S卫星工程科学应用系统的顺利运行提供数据支撑, 也可以为未来其他科学卫星类似数据库的搭建提供参考和借鉴.  相似文献   

连续台风时期香港区域的水汽变化分析     

周苏娅  闻德保  梅登奎 《大地测量与地球动力学》2020,40(1):82-86

利用香港卫星定位参考站网GNSS观测数据,提取强热带风暴"塔拉斯"与热带风暴"洛克"影响期间各测站天顶方向对流层延迟,反演香港区域大气可降水量;根据香港区域49个天文台气象站提供的实测降雨量数据,分析大气可降水量与实际降雨量的相关性,以及两次台风对香港区域水汽时空分布的不同影响。结果表明,大气可降水量在台风影响前期均上升,在大量降雨后回落,但在连续台风的间歇期间,仍高于台风来临前的水平;水汽累积是大量降雨的前提条件,当水汽累积量相近时,水汽累积时长与累积降雨量呈正相关;台风期间大气可降水量值超过65 mm的区域面积与台风等级相关,台风路径对局部水汽分布有一定的影响。  相似文献   

西昆仑穆呼锰矿床地质特征、控矿因素及成矿模式     

董志国  张连昌  董飞羽  张帮禄  谢月桥  查斌  彭自栋  王长乐 《吉林大学学报(地球科学版)》2020,50(5):1358-1372

穆呼锰矿床位于西昆仑造山带玛尔坎苏锰矿带东段，研究程度相对薄弱。穆呼锰矿床的含矿地层为上石炭统喀拉阿特河组，自下而上可分为角砾灰岩、钙质杂砂岩和含炭质泥灰岩3个岩性段，具有完整的海侵层序特征，反映了由逐步断陷到稳定沉积的盆地演化过程。锰矿层赋存于第三岩性段炭质泥灰岩中，矿石矿物主要为化学组分纯净的泥晶菱锰矿。根据详细的矿相学观察并综合前人研究成果，笔者认为菱锰矿是初始沉淀的锰（氢）氧化物与有机质通过成岩反应形成的。这种成矿机制需要3个基本条件：丰富的锰质来源、氧化还原分层的海水和有机质的大量埋藏。在穆呼一带，有利于满足以上条件的主要控矿因素包括：伸展拉张的构造背景、强烈的海底热液活动、海侵事件和温暖潮湿的古气候。笔者根据w（Ba）-w（P₂O₅）图解并结合区域对比分析，初步认为穆呼锰矿床的成矿模式可能属于最小含氧量带扩张型。  相似文献